Comments for Juan Pablo Caram, PhD https://caram.cl Electrical Engineer, Integrated Circuit Designer, Software Developer, Maker, ... Sun, 28 Apr 2024 05:07:00 +0000 hourly 1 https://wordpress.org/?v=4.2.38 Comment on Tracing the silkscreen with FlatCAM by Gustavo Melgar Baldivieso https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2267 Sun, 28 Apr 2024 05:07:00 +0000 http://caram.cl/?page_id=393#comment-2267 your flatcam website doesnt work

]]> Comment on Tracing the silkscreen with FlatCAM by Jostikas https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2261 Tue, 06 Feb 2024 08:04:00 +0000 http://caram.cl/?page_id=393#comment-2261 Hi!
Is there a similar way to paint copper areas (instead of painting non-copper) in 8.5? Useful for milling off soldermask from pads.

]]> Comment on Tracing the silkscreen with FlatCAM by Daniel Frolich https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2235 Sat, 27 Nov 2021 14:25:00 +0000 http://caram.cl/?page_id=393#comment-2235 I am running ver 8.5 and can not enter ANY data in the command line…what am I doing wrong?

]]> Comment on Tracing the silkscreen with FlatCAM by Hej rup https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2234 Sat, 20 Jun 2020 16:12:00 +0000 http://caram.cl/?page_id=393#comment-2234 Thank you, exactly what I was looking for!

]]> Comment on Tracing the silkscreen with FlatCAM by Mark Schuurman https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2233 Thu, 06 Feb 2020 19:22:00 +0000 http://caram.cl/?page_id=393#comment-2233 …only now I’m looking for a way to edit the silkscreen. I have a couple of 0603 leds and I want to eliminate the symbols on the PCB in the silkscreen generated by EasyEDA. Th elaser blows away too much isolation…

]]> Comment on Tracing the silkscreen with FlatCAM by Mark Schuurman https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2232 Fri, 24 Jan 2020 23:10:00 +0000 http://caram.cl/?page_id=393#comment-2232 Thank you, exactly what I was looking for!

]]> Comment on Tracing the silkscreen with FlatCAM by Curtis Newton https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2231 Tue, 24 Sep 2019 20:47:00 +0000 http://caram.cl/?page_id=393#comment-2231 why the command lines ? you can do that with the giu

]]> Comment on Tracing the silkscreen with FlatCAM by Graciano Romero https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2230 Tue, 10 Sep 2019 14:33:00 +0000 http://caram.cl/?page_id=393#comment-2230 It took a few min to figure the CMD line and how it functions in flatcam in windows 10.
it would be nice if this was sampled in the manual. but over all it is an awesome program to with.

]]> Comment on Tracing the silkscreen with FlatCAM by David https://caram.cl/software/flatcam/tracing-the-silkscreen-with-flatcam/#comment-2228 Tue, 16 May 2017 16:31:00 +0000 http://caram.cl/?page_id=393#comment-2228 First of all: Thank you for this great program. It is very powerful.
I am trying to sensitize negative dry film with a 405 nm laser and my cnc.
I would like the track of the gerber tracks to be traversed by the laser giving as many passes as necessary to complete the width of the track and draw the pads completely. I have seen that the post of drawing serigraphy is very close.
Does Juan Pablo consider it interesting that FlatCAM does this work?
If so, I would like you to tell me when you are planning to do so.
If you need help I could collaborate on its implementation, although I do not know much about python. But everything is learned! By the way, I’m from Spain. You speak Spanish?
Regards, and thank you very much
David Sandoval

]]> Comment on Board Cutout with FlatCAM by jpcaram https://caram.cl/software/flatcam/board-cutout-with-flatcam/#comment-2227 Fri, 20 Jan 2017 20:05:00 +0000 http://caram.cl/?page_id=422#comment-2227 Yes Anish, that is exactly what the video shows and what I just explained.

I suggest you use the “Discussion Group” in flatcam.org for an extended discussion on how to achieve your particular goal.

]]>